A-A-50747
6 May 1987
COMMERCIAL ITEM DESCRIPTION
POUCH, AMMUNITION MAGAZINE, 9MM
The General Services Administration has authorized the use of this commercial
item description.
Scope:
This commercial item description covers one type and size of ammunition pouch.
The pouch is designed accommodate one 15 round ammunition magazine for the
M9, 9MM, PDW.
Applicable Documents:
Standards:
Stitches, Seams and Stiching
FED-STD-751
Color, Requirements for Individual Color chips, 3X5
FED-STD-595
Identification marking of U.S. Military property
MIL-STD-130
Drawings:
Dwg 20B, Pouch, Ammunition Magazine, 9MM
Drawings available through the contracting activity from Warner Robins,
WR-ALC
Robins AFB, GA 31096-5609
Salient Characteristics:
A Government furnished 9mm magazine shall be capable of properly fitting within
thei pouch. There shall be no friction between the magazine and the pouch when
inserting a loaded magazine (one round minimum). Inserting should be without
effort. Failure shall occur if the magazine fails to enter or is forced into
the pouch. The pouch shall comply with the requirements as defined in the
drawing.
Flap Fastener:
The flap fastener shall function prperly (open & closing freely), while pro-
viding secure retention of the magazine.
Belt Loop Fastener:
The belt loop fastener shall function properly (open and close unidirection-
ally).
Serviceability:
The pouch shall not show evidence of loosening of stitches, breaking of thread
and cracking.
DISTRIBUTION STATEMEnt A. Approved for public release: distribution is
unlimited.
FSC 1095
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business